Skip Navigation Website Accessibility
 


DIGITAL DUAL WIRELESS CONTROLS

Carrera 10109 2.4 GHz Wireless Control Set DUO Digital 124/132
Experience the joys of wireless racetrack fun for Carrera DIGITAL 124 and Carrera DIGITAL 132 with the 2.4 GHz WIRELESS+ set-up.

Carrera Real Racing: 2.4 GHz WIRELESS+ radio controlled technology
Race for up to 6 drivers
Ultra-light, wireless speed controller
Recharger with direct connection to the Carrera circuit
Operating range up to 15m
Uninterrupted and frequency independent due to frequency hopping
8 hours of non-stop operation
Battery powered with Lithium Polymer power pack

Contents:

2 2.4 GHz WIRELESS+ Speed Controller
1 2.4 GHz WIRELESS+ Receiver
1 2.4 GHz WIRELESS+ double charging station
1 Adapter Unit
1 Shoulder complement
1 End sections outside shoulder (left/right)
Lithium-polymer battery
instructions
These accessories also fit to the following systems:
Carrera DIGITAL 132 DIGITAL 124 WIRELESS+ SET SINGLE (Item no.: 10110) WIRELESS+ Speed Controller (Item no.: 10111)

Coding instructions for 2.4 GHz controllers with the 30352 Control Unit:

Please make sure there is only 1 wireless receiver plugged into your track. This receiver should be plugged in to either the 1st or 2nd tower on your control unit.

Step 1- Take all the cars off of the track

Take controller 1 and hit the set button on the receiver, when you see the #1, press the black button on top of your controller

Take the car 1 and put it on the track.

Press the code button once and then press the trigger on your controller.  Car 1 should now be coded to controller 1.

 

Step 2-

Take car 1 off the track

Take controller 2 and hit the set button twice on the receiver, when you see the #2, press the black button on top of your controller. 

Take the car 2 and put it on the track.

Press the code button once and then press the trigger on your controller.  Car 2 should now be coded to controller 2.

 

Step 3 -

Take car 2 off the track

Take controller 3 and hit the set button twice on the receiver, when you see the #3, press the black button on top of your controller. 

Take the car 3 and put it on the track.

Press the code button once and then press the trigger on your controller.  Car 3 should now be coded to controller 3.

Follow the same steps for the remaining cars/controllers.

You will not need to do this before every race; each car will stay coded to its controller.  You should now be set to race